How Safe Is Your Home?

Stay safe in your home

Electricity can kill. Electricity is now the major cause of accidental fires in homes.

Government statistics show that electricity causes more than 20,000 fires a year – almost half of all accidental UK house fires. Each year, about 70 people are killed and 350,000 are seriously injured due to an electrical accident in the home.

Modern living has meant we use more and more electrical appliances in the home. For instance, just 20 years ago the average UK home had a hi-fi system and one TV or video, whereas today it is more likely that there are at least two TVs, a DVD player, a satellite receiver, games console, microwave and computer. So the risk of electrical accidents in the home is much higher than before.

Who should carry out electrical work in my property?

It is important that any electrical installation work is carried out only by people who are competent. This means people who have the knowledge, skills and experience needed to avoid dangers to themselves and others that electricity can create. It’s easy to make an electrical circuit work – it’s far harder to make the circuit work safely.

Get to know your electrics

Your property will have some of the following

Main Switch

The main switch in the consumer unit (fuse box) allows you to turn off the supply to your electrical installation. Some electrical installations have more than one main switch. For example, if your home is heated by electric storage heaters, you may have a separate consumer unit for them. The consumer unit should be easy to get to, so find out where the main switch is to turn the electricity off in an emergency.

Fuses

Older homes often have re-wireable fuses which automatically disconnect the circuit to prevent danger. When a fault or overload current flows through the fuse wire, it will become hot, and melt when the current goes above a safe level. The melted fuse breaks the faulty circuit so protecting it against overloading.

Circuit-breakers

Newer homes are likely to have circuit-breakers in the consumer unit which switch off a circuit if there is a fault. Circuit-breakers are similar in size to fuse-holders, but give more precise protection than fuses. When they ‘trip’, you can simply reset the switch. However, you first need to find and correct the fault.

Residual current devices (RCD)

An RCD is a life-saving device which is designed to prevent you from getting a fatal electric shock if you touch something live, such as a bare wire. It provides a level of protection that ordinary fuses or circuit breakers cannot.

How old is your wiring?

Faulty and aging wiring is one of the major causes of electrical fires in the home. You can avoid these by having regular checks carried out on the condition of your cables, switches, sockets and other accessories. There are clear signs that can help you tell the age of electrical installations in your home.

These are:

  • Cables coated in black rubber (phased out in the 1960s);
  • Cables coated in lead or fabric (before the 1960s);
  • A fusebox with a wooden back, cast iron switches, or a haphazard mixture of fuse boxes (before the 1960s);
  • Older round pin sockets and round light switches, braided flex hanging from ceiling roses, brown and black switches and sockets mounted in skirting boards (before the 1960s);
  • Wall-mounted light switches in bathrooms (before the 1960s).
Read also:  How to choose the right fluorescent lighting

Electrical dangers around the home

Electricity improves our daily lives – but only when used safely. Don’t create hazards by overloading sockets, and never ignore warning signs like burning smells, sounds of arcing (buzzing or crackling), fuses blowing or circuit-breakers tripping. Electrical accidents are most likely to happen when equipment is damaged or misused. Failure to correct the problem could have devastating effects. This sounds like common sense, but you would be surprised how many of us fail to follow basic safety guidelines.

When did you last check the condition and safety of your plugs, sockets and flexible cables?

Damaged plugs, sockets and flexible cables can cause electric shocks, burns and fires.

For you and your family’s safety:

  • Check the plug and socket for burn marks, sounds of ‘arcing’ (buzzing or crackling), fuses blowing, circuit-breakers tripping or if it feels hot.
  • Remove plugs from sockets carefully. Pulling out a plug by the cable puts a strain on it, and could damage the contact between the plug and the socket. This could result in the plug overheating, its wires becoming loose or an electric shock (if the earth wire is disconnected).
  • Use plugs with the British Standard safety mark – they have live and neutral pins with insulating sleeves that allow you to put them in and pull them out of sockets safely.
  • Always replace damaged cables immediately. Touching exposed live wires may give you an electric shock or you could even be killed.

Obvious dangers – yet we all make these mistakes

Unplug appliances before you try to do any maintenance on them

Trailing the cable under the carpet or rug to keep it out of the way.

Drying clothes on an electric heater, with water dripping onto live parts – This is particularly dangerous, and could cause an electric shock or fire. Many electrical appliances, such as heaters, have ventilation slots to prevent overheating. If these slots are covered up, the appliance could overheat and catch fire, or if water drips in, there is a risk of electric shock.

Installing downlighters – Choosing the wrong downlighters, installing them incorrectly or fitting the wrong replacement lamp can pose a serious fire risk in your home. Use a registered electrician to install your downlighters. For your safety you should check for visible markings on downlighters indicating lamp wattage and lamp type.

Never drill or fix nails in walls without knowing what’s behind them – Walls and partitions conceal electrical cables and gas and water pipes.

How much do you rely on adaptors and extensions around your home?

You can expect to find around four sockets in an average room in a house. Although this is enough for most purposes, an increase in the use of computers, games consoles and other appliances has led to the number of sockets being needed in an average room to increase to eight. Extension leads and adaptors often provide a quick and easy solution but, in reality, these leads and adaptors are often misused, and can present a very real danger. In extreme cases they can overheat, which can cause a fire.

Don’t

  • Use adaptors plugged into other adaptors; or
  • Overload adaptors, particularly with high-current appliances such as kettles, irons and heaters. (Low –current appliances include radios, televisions, computers and hi-fi equipment.)
  • Buy cheap, substandard adaptors

The most sensible action would be to install extra sockets.

Kitchen Safety

We all know that water and electricity make a lethal combination. So it’s important that electrical equipment is installed correctly, and that you use appliances in your kitchen with care.

Read also:  How are electrics installed?

Bathroom safety

From an electrical safety point of view, the bathroom is possibly the most dangerous room in the home. The consequences of an electric shock are far more severe in a bathroom or shower room as wet skin reduces the body’s resistance. There are special requirements for electrical installations in bathrooms.

Garden Safety

Although electricity makes gardening much easier, wet conditions and contact with the ground means that the risk of injury or death from electric shock is much greater than the risk from using electrical equipment indoors.

Checking a Plug

  • Remove the plug from the socket and check the plug is not damaged.
  • Look for signs of overheating, such as discoloured casing or cable.
  • Check that the plug is marked British Standard BS 1363
  • Check that the cable sheath is firmly clamped in the plug and that no coloured wires are showing.

All modern appliances in the UK use the familiar square-pin 13-amp plug. These plugs are used for handheld appliances such as hairdryers and vacuum cleaners, and appliances like microwave ovens. The plug and cable can suffer damage, particularly if they connect to handheld appliances. Checking a plug and its cable does not need a lot of detailed electrical knowledge and these tips should help. With the plug removed from the socket, check the cable from end to end and ask the following questions.

Is the cable cut, worn or damaged in any way?

There should preferably be no joints in the cable, and certainly no repairs with insulating tape.

If for any reason, you need to check that a cable is correctly wired and fused, do the following:

  • Remove the plug from the socket, and remove the cover. Check that:
  • The brown wire goes to live (L);
  • The blue wire goes to neutral (N);and
  • The green-and-yellow wire goes to earth (E).
  • Check that the cord clamp holds the cables heath securely and that both of the screws are tight.
  • Check that the screws holding the three wires are tight.
  • Check that the fuse is the correct size and meets British Standard BS 1362 – see the manufacturer’s instructions if you are not sure what fuse to use. The fuse should clip securely into its holder. It should not be loose and there should be no signs of overheating.
  • Replace the cover securely

Brown to live (L) Blue to neutral (N) Green and yellow to earth (E)

Correctly wired plug

Most table lamps, standard lamps, televisions, computers, mixers, blenders, power drills, jigsaws, soldering irons will use 700W or less. Larger appliances such as washing machines, dishwashers and toasters, irons and heaters will use more than 700W. For your convenience these are just standard two plug fuse ratings (3A and 13A). For appliances up to 700W, you use a 3A fuse. For those over 700W, you use a 13A fuse.

Green Tips

GREEN TIP: Try turning your washing machine down from a 60º to 40º wash. It’ll save you 30% of your electricity bill with every wash.

GREEN TIP: Try turning your thermostat down by 1º and the only thing that will notice will be your purse. You could save up to 10% of your annual bill.

GREEN TIP: Consider using an energy efficient bulb. They last up to 12 times longer and save on electricity.

GREEN TIP: Britons waste the equivalent of around two power stations’ worth of electricity each year by leaving TV sets and other gadgets on standby. You could save up to 10% off your yearly electricity bill.

Source: electricalsafetyfirst.org.uk

Electrical safety at home

youtube.com
Design Ideas Mail
Once a Month New Design Ideas

You will receive:

  • Top Ten Design Ideas In Different Rooms.
  • Tips and Trick to Use in Your Room Decoration.
  • DIY Design Projects.
100% Anti-Spam Protection100% Anti-Spam Protection
1 Star2 Stars3 Stars4 Stars5 Stars (No Ratings Yet)

About the author

ValeraValera

Related

Cool down with a whole-house fan Whole-house fans may seem old fashioned, but they're enjoying renewed...

JOIN THE DISCUSSION